2016通用专用检测仪gm mdi 别克/雪佛兰/凯迪拉克/编程七天包退

通用最新检测仪MDI--是美国通用公司提供给他的特约维修站使用的3代原厂检测仪，能测世界范围内2008年后的通用的所有车型，是通用汽车全球服务站必备产品。支持2005年到2016年雪佛兰.别克.凯迪拉克所有车型，包您满意！上海实体店！ 

支持老款及新款雪佛兰.别克.凯迪拉克所有车型

可享受免费安装GDS2，TECH2，RDS和欧宝OPEL软件，RDS软件可做2010-2015年新塞欧和新凯袁激活后终生使用，与4S同步更新 ！！！

资深4S店专家为你解决各种车的疑难杂症，如：进水车，事故车，匹配各种车的车身电脑，钥匙编程，发动电脑编程，变速箱，气囊电脑编程，低配升高配，定速巡航等

本款通用检测仪可刷隐藏功能和钥匙编程,提供刷多功能方向盘的详细指导是13年新君越2.0舒适。

承接上海地区所有通用车系编程业务，进水车，事故车  ，火烧车。可上门编程也可把车辆开过来，地址：上海市嘉定区新东方汽配城博园路1333号，280

提供在线编程,编程不成功不收费

我们使用的是原厂双层主板，让你在编程过程中永不锁机！！！如需技术指导请致电280

MDI模块功能：

1.GDS2原厂软件，具有强大的检测功能，能检测发动机，

地盘，车身系统等。

2.支持2009年后的所有通用车系，包括北美通用，上海通

用，凯迪拉克，saab萨博车型

3.支持USB连接

(咨询特价)00-2012年 支持Pass-Thru 方式的维修编程

(咨询特价)16年 支持车辆诊断和在线编程

6.缩短维修编程时间,GMLAN通讯协议的ECU编程时间为目

前使用Tech2的1/3

7.可以对新君威，新君袁科鲁兹，英朗车型节气门复位

8.可以在线匹配新君威，新君袁科鲁兹，英朗车型钥匙

（ 增加或是全丢都可以）

 RDS安装界面下,激活后终生可用

Multiple Diagnostic Interface

Description:

GM MDI (Multiple Diagnostic Interface) for wireless ECU reprogramming utilizing J2534. Hardware kit only.

The GM MDI is initially being introduced with Pass-Thruprogramming capabilities only. It can be used to perform

Pass-Thru programming on all vehicles built since 1993 and willsupport all vehicles into the future.The GM MDI will

be required to perform diagnostics onselected NAO vehicles for model year 2009. Diagnostic soft-ware is scheduled to

be released for the GM MDI during thefourth quarter of 2008.

When diagnostics are introduced, the MDI will also get a remote data record capability. This permits recording data

duringa road test, similar to the Tech 2 Snap Shot function. A trigger switch connector is provided for this

purpose. Regulations require programming procedures to be compliantwith SAE Recommended Practice J2534. The GM SPS

is com-pliant with SAE Recommended Practice J2534, and the GMMDI is compliant with the portions of SAE J2534 that

areapplicable for GM vehicles.

The Future of the Tech 2
The Tech 2 remains an essential tool through at least the 2010 model year. The GM MDI will not support past models

when its diagnostic capabilities are introduced. And, the Tech2 will continue to be needed to diagnose all vehicles

fromprevious model years. Remote programming with the Tech 2 will continue to be supported for use on all 2007 and

previous vehicles.Additional information will be supplied in future.

Specifications

complete genuine GM MDI

Introduction of MDI

The GM MDI is a compact communication module that manages the transfer of data between a vehicle’s onboard

ECU network and a PC.The EL-47955 MDI is a kit of components:

A GM MDI
B J1962 Diagnostic connector
C USB cable
D Ethernet cable
E AC adapter/power supply
Wireless interface
AAA batteries
Owner manual
Operating software for the MDI will be downloaded from the TS2WEB website.
The GM MDI allows the user to perform Pass-Thru programming procedures using software running on a laptop or desktop PC.

What Protocols does the GM MDI Support@
For immediate use -- At present,vehicles have two buses on the 16 pin connector (high speed and low speed GMLAN).
The GM MDI communicates using all of the existing GM protocols, the same as the Tech2:
– UART
– Class 2
– KWP(咨询特价)
– GMLAN (CAN)
For future use -- Global architecture coming in July 2008 for MY 2009 will use a total of 4 GMLAN links. (This is
a limited rollout in MY 2009.) Global architecture adds a medium speed bus and an expansion bus. The Tech 2 and
CANdi module can run only low and high speed, and won’t work on the 4 GMLAN link system for diagnostics or programming. The MDI will have this capability.
How is the GM MDI Connected@
The GM MDI will be connected between the vehicle and the PC using the DLC and cable.Connection between the GM MDI and the PC can be accomplished several ways:
– Using the supplied cable to connect the mini USB port on the GM MDI and the USB port on the PC
– Using a standard CAT5 cable toconnect the Ethernet port on the GM MDI and the Ethernet port on the PC
– Using the WLAN card built into the
GM MDI to communicate with the PC through the dealership’s wireless network.

How Will the GM MDI be Used@
The GM MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform
Pass-Thru programming on all vehicles built since 1993 and will support all vehicles into the future.
The GM MDI will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008. When diagnostics are introduced, the MDI will also get a remote data record capability. This permits recording data during a road test, similar to the Tech 2 Snap Shot function. A trigger switch connector is provided for this purpose.
Regulations require programming procedures to be compliant with SAE Recommended Practice J2534. The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.
The Future of the Tech 2
The Tech 2 remains an essential tool through at least the 2010 model year. The GM MDI will not support past models when its diagnostic capabilities are introduced. And, the Tech2 will continue to be needed to diagnose all vehicles from previous model years.
Remote programming with the Tech 2 will continue to be supported for use on all 2007 and previous vehicles.
Additional information will be supplied in future TechLink articles and dealer communications